- This topic has 7 replies, 7 voices, and was last updated 7 months, 1 week ago by
.
-
Posts
-
Hello, has anyone used tslot for a truck bed drawer sliding system? I was thinking about something full width and length but short enough I can close my bed cover. Any help would be appreciated.
It can definitely be done, but the time and cost probably wouldn’t be worth it when you can get a pre made ones online for that purpose. The “decked” system is pretty cool. Take a look- https://www.homedepot.com/collection/Storage-&-Organization/DECKED-Truck-&-Van-Storage-System-Collection/Family-312838488
There’s also a place called “Extobend” that might be worth a look. You could try going through one of the manufacturers for a free quote but they are backed up right now, so you may waiting quite a long time.
Thanks guys! I’ll look into those.
If you haven’t found something yet, there is another company called “Bedslide” you might want to look into.
Ive done one with 8020 in my 8foot bed. I made it a dual slider with 1530 frame that slide out to the end of my tailgate and 1015on the inside to slide out another 4 feet. I like it. Works great!
Good idea, that sounds pretty straightforward and not too expensive.
Thanks.
I just made for my 2018 Dodge Ram and it worked out great. I ordered through Parco and they helped me with the design a bit and also I saved some $$. About 10-15% or so lower than the other sites I looked on.
- You must be logged in to reply to this topic.