- This topic has 10 replies, 11 voices, and was last updated 2 years, 4 months ago by
Gianni-Machine.
-
AuthorPosts
-
Jase_XzavierParticipant
Which is the most common type of connector or fastener used to fasten the T-Slot parts together?
July 6, 2021 at 5:54 am #4209AlfonsMachineParticipantT-nut fasteners are most commonly used. These are very handy to work with. It has to be just dropped into the T-slot and twisted into the locked position.
July 6, 2021 at 9:47 am #4217Andrew.MasonParticipantQuick connectors are used in the corners and it has grooves for mounting surface elements.
July 7, 2021 at 6:43 am #4451KDalton-mechParticipantTilt connectors, milling connectors, bolt connectors, cube connectors, angle connectors are some of the connectors used with T-slot profiles.
July 8, 2021 at 1:39 am #4517MilesCantonParticipantI usually use a combination of angle connectors and milling connectors for most projects. Although of course using bolt connectors where needed.
July 10, 2021 at 9:15 am #4562JohnMarkusParticipantCommon would also heavily depend on your usage and projects. I think most connectors are valuable depending on your project
July 10, 2021 at 9:37 am #4572foster-aluminumParticipantAnchor style connectors which are also known as universal connectors are mostly preferred to fasten T-Slots together.
July 18, 2021 at 6:52 am #4770Gianni-MachineParticipantI usually prefer corner brackets in addition to hidden fasteners because I feel the corner brackets provide more sturdiness and better support.
July 19, 2021 at 3:30 pm #4823 -
AuthorPosts
- You must be logged in to reply to this topic.