- This topic has 8 replies, 7 voices, and was last updated 1 year, 10 months ago by
.
-
Posts
-
Modular clean rooms are most often used in manufacturing sites that use critical-clean processes especially in pharmaceutical processing, semiconductor manufacturing, medical device, aerospace, food and beverage manufacturing etc.
This is true, but what is your question?
Funny, I missed asking the question….
T slots extrusions tend to accumulate dirt, coolants, chips etc, so how are these structures cleaned and maintained in this environment?
The purpose of Clean room enclosure is to keep that special area isolated to reduce accumulation of dusts and other industrial pollutants. This can be achieved by keeping the enclosure room tightly sealed, and by using vacuum cleaners to clear the dust already accumulated.
In Pharma companies, their finished products are stored in clean room to keep them safe from contamination. Clean rooms have rubber door seal and hence doesn’t allow air and dust from outside to enter. So the room stays clean.
Clean rooms are insulated from the outer environment. The enclosure is sealed with safety interlock switches that provide additional safety. The enclosure acts as a shield and safe guards its contents.
Clean rooms are usually permanent fixtures that are used in a factory where they need maximum cleanliness and a dust-free zone. They are strategically placed where the least amount of contamination exists and are constructed to be air-tight to minimize pollutants entering into the enclosure.
Modular clean rooms are necessities in food pharma industry, food industry and in places where they have to maintain ingredients or items safe without contamination. These rooms are specially built to be sturdy and are sealed tight, even the doors have rubber seal so that air doesn’t enter into it. Thereby, maintaining maximum isolation and freshness.
Prevention is the key in these clean room enclosures. Preventing entry of dust and contamination. Cleaning before and after every shift. Use of deionised and distilled water for mopping. Use of HEPA filter vacuum after mopping are some of the standard procedures done. Proper training of staff and regular checkups have to be done.
- You must be logged in to reply to this topic.