Basic parameters

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • KDalton-mech
    Participant

      What are the basic parameters we have to consider before we start a T-Slot framing project?

      AlfonsMachine
      Participant

        The basic parameters for any design with T- Slot are

        1. The right extrusion profile
        2. Proper joint configuration
        3. Load factor.
        4. Vibration effects.

        foster-aluminum
        Participant

          Choose the right extrusion profile with the following points taken into consideration:
          1. Calculating the safety factor.
          2. Calculating the bending stresses
          3. Calculating the buckling strength.

          Gianni-Machine
          Participant

            While choosing the right configuration, avoid relying on friction based joints to support the load.

            MilesCanton
            Participant

              Would also like to note that you should use high-strength extrusion systems for more demanding applications

              JohnMarkus
              Participant

                Do make note to choose the right join configuration as well depending on what you need.

                Kyson1970
                Participant

                  First we have to choose the
                  Structure type : static or dynamic
                  Load handling capacity and
                  Stress involved

                  SageJav
                  Participant

                    I think we left out the aesthetics part as that also has an important role when it comes to using it for domestic applications like furniture, prefab house etc.

                    Jase_Xzavier
                    Participant

                      Selecting the Right Extrusion profile and extrusion joints are very essential as is provides stability and strength to the structure.

                      Andrew.Mason
                      Participant

                        1st make sure whether the given structure would function well after being constructed. Then select the T-slots with reference to the acting load.

                        Lori-Ames
                        Participant

                          A lot of great tips here to keep in mind, some even I didnt think of before starting my projects. Think I’m going to make a checklist out of these

                        Viewing 11 posts - 1 through 11 (of 11 total)
                        • You must be logged in to reply to this topic.

                        Copyright © 2021 TSLOT.PRO All rights reserved